产品细节说明：MVME712/M MOTOROLA VME控制器模块

1. 接口丰富：

   • 四个25针多协议EIA-232-D串行端口，通过P2适配器实现。
   • 一个独立的打印机端口（通过P2适配器）。
   • 小型计算机系统接口（SCSI）屏蔽连接器总线接口（通过P2适配器），用于连接内部和外部设备。
   • 前面板还配备一个以太网端口、一个SCSI端口和一个打印机端口。

2. 配置灵活：

   • 串行端口可通过MVME712M上的跳线配置为EIA-232-D DTE或DCE。
   • P2适配器板允许SCSI电缆连接到其他SCSI设备，或通过扁平带状电缆连接到MVME712M的连接器。

3. 指示灯设计：

   • 模块上的绿色发光二极管指示终端器电源。
   • 黄色LED指示收发器电源。

4. 保护机制：

   • 前面板上的射频干扰（RFI）保护装置。
   • 前面板上的静电放电（ESD）保护装置。

MVME712/M

产品详情参数 ：MVME712/M MOTOROLA VME控制器模块

• 串行端口：提供四个25针多协议EIA-232-D串行端口，支持灵活的通信配置
• 打印机端口：一个独立的打印机端口，方便连接各种打印机设备
• SCSI接口：小型计算机系统接口（SCSI）屏蔽连接器总线接口，支持内部和外部设备的连接
• 以太网接口：前面板配备一个以太网端口，支持高速网络通信
• P2适配器：需要使用P2适配器板进行连接，以提供额外的连接灵活性和扩展性

应用领域：MVME712/M MOTOROLA VME控制器模块

摩托罗拉VME模块经过指定、设计和测试，可在强制空气冷却的情况下，在0摄氏度至55摄氏度（32华氏度至131华氏度）的进风温度范围内可靠运行。温度鉴定在标准的摩托罗拉VMEsystem 1000机箱中进行。通常只要有5CFM的气流流过模块，就能达到足够的冷却效果。在更有利的散热条件下，增加气流可使模块在高于55摄氏度的环境下可靠运行。

MVME712/M模块以其高性能和灵活性，广泛应用于军事、航空航天、工业自动化和医疗等领域。MVME712/M是一款功能强大、接口丰富、配置灵活且兼容性强的VME控制器模块，适用于多种领域和场景。MVME712/M是摩托罗拉MPU VME模块、VME处理器模块、嵌入式控制器和单板计算机（SBC）系列处理器模块的I/O转换模块。它主要用作处理器模块与其外围设备之间的接口，提供后面板行业标准连接器，以简化客户的外部电缆要求。

Product Details: MVME712/M MOTOROLA VME Controller Module

Rich interfaces:

Four 25 pin multi protocol EIA-232-D serial ports, implemented through a P2 adapter.
An independent printer port (via P2 adapter).
Small Computer System Interface (SCSI) shielded connector bus interface (via P2 adapter), used to connect internal and external devices.
The front panel is also equipped with an Ethernet port, a SCSI port, and a printer port.

Flexible configuration:

The serial port can be configured as EIA-232-D DTE or DCE through jumper wires on MVME712M.
The P2 adapter board allows SCSI cables to be connected to other SCSI devices or to MVME712M connectors through flat ribbon cables.

Indicator light design:

The green LED on the module indicates the power supply of the terminal.
The yellow LED indicates the power supply of the transceiver.

Protection mechanism:

Radio frequency interference (RFI) protection device on the front panel.
The electrostatic discharge (ESD) protection device on the front panel.
Product details and parameters: MVME712/M MOTOROLA VME controller module
Serial port: Provides four 25 pin multi protocol EIA-232D serial ports, supporting flexible communication configurations
Printer Port: An independent printer port that facilitates the connection of various printer devices
SCSI interface: Small Computer System Interface (SCSI) shielded connector bus interface, supporting the connection of internal and external devices
Ethernet interface: The front panel is equipped with an Ethernet port that supports high-speed network communication
P2 adapter: P2 adapter board is required for connection to provide additional connection flexibility and scalability
Application area: MVME712/M MOTOROLA VME controller module

The Motorola VME module has been specified, designed, and tested to operate reliably within the inlet air temperature range of 0 ° C to 55 ° C (32 ° F to 131 ° F) under forced air cooling. Temperature identification is conducted in a standard Motorola VMEsystem 1000 chassis. Usually, as long as there is 5CFM airflow passing through the module, sufficient cooling effect can be achieved. Under more favorable heat dissipation conditions, increasing airflow can enable the module to operate reliably in environments above 55 degrees Celsius.

The MVME712/M module is widely used in military, aerospace, industrial automation, and medical fields due to its high performance and flexibility. MVME712/M is a powerful, rich in interfaces, flexible in configuration, and highly compatible VME controller module, suitable for various fields and scenarios. MVME712/M is an I/O conversion module for Motorola MPU VME modules, VME processor modules, embedded controllers, and single board computer (SBC) series processor modules. It is mainly used as an interface between the processor module and its peripheral devices, providing industry standard connectors for the rear panel to simplify customers’ external cable requirements.

其他型号推荐：MVME712/M MOTOROLA VME控制器模块