MVI69-PDPMV1是一个ProfiBus DP V1主网络接口模块。该模块用于1769 CompactLogix产品系列以及MicroLogix 1500 LRP。它有一(1)个DB-9F光学隔离RS-485通信端口，可兼容Profibus V1协议。该模块支持多达125个从机的通信，并能够进行多达1536个循环字节输入和1536个字节输出数据。

DP-V1系列带CFG端口的MVI69-PDPMV1主通信模块由Prosoft Technology设计，其子品牌为inRAx。该模块使用一个CFG端口作为其主接口，它具有明亮的LED指示灯，用于显示模块状态、电源状态、应用程序状态、端口活动和错误状态等操作元素。该模块使用的连接电缆是RJ45至DB-9 M和6英尺RS-232电缆。该模块的底板电流额定值为800 mA，最大值为5伏DC。如果与1746-L43和1746-L45一起使用，电源距离额定值2和必须在2个插槽内。MVI69-PDPMV1与单槽1769背板兼容，它被处理器识别为输入/输出模块。MVI69-PDPMV1模块可用于访问处理器的存储器，以便在处理器和模块之间传输数据。这两个组件之间的数据传输是使用梯形逻辑执行的，该模块附带了一个可以使用的样本梯形文件。关于该模块的配置，所有相关数据可通过特殊的ProSoft Configuration Builder软件解决方案获得，该软件解决方案可用于正确定义PROFIBUS网络，并随后通过PC的串行端口将配置下载至模块。MVI69-PDPMV1模块与CompactLogix系列的所有处理器兼容，包括L20/L23/L30/L31/L32/L35、L43和L45。但是，应该注意，只有当L43和L45安装了RSLogix 5000 v16.03软件或更高版本时，它们才受支持。此外，该模块支持大多数MicroLogix 1500 LRP控制器。该模块是标准化的，并通过Ex证书(ATEX指令)、CE、CB安全、劳氏船级社、C/UL 1级2区等认证。使用该模块的环境条件包括相对非冷凝湿度为5%至95%，工作温度范围为0至60摄氏度(32至140华氏度)，储存温度范围为-40至85摄氏度(-40至185华氏度)。

MVI69-PDPMV1

MVI69-PDPMV1 is a ProfiBus DP V1 main network interface module. This module is used for the 1769 CompactLogix product series and MicroLogix 1500 LRP. It has one (1) DB-9F optical isolated RS-485 communication port that is compatible with the Profibus V1 protocol. This module supports communication with up to 125 slaves and can perform up to 1536 cyclic byte inputs and 1536 byte outputs of data.

The MVI69-PDPMV1 main communication module of the DP-V1 series with CFG ports is designed by Prosoft Technology and its sub brand is inRAx. This module uses a CFG port as its main interface, which has bright LED indicators to display operational elements such as module status, power status, application status, port activity, and error status. The connection cables used in this module are RJ45 to DB-9 M and 6-foot RS-232 cables. The rated current of the bottom plate of this module is 800 mA, with a maximum value of 5 volts DC. If used together with 1746-L43 and 1746-L45, the power supply must be within 2 slots of the rated distance of 2. MVI69-PDPMV1 is compatible with a single slot 1769 backplane and is recognized by the processor as an input/output module. The MVI69-PDPMV1 module can be used to access the processor’s memory for data transfer between the processor and the module. The data transfer between these two components is performed using ladder logic, which comes with a sample ladder file that can be used. All relevant data regarding the configuration of this module can be obtained through a special ProSoft Configuration Builder software solution, which can be used to correctly define the PROFIBUS network and subsequently download the configuration to the module through the serial port of the PC. The MVI69-PDPMV1 module is compatible with all processors in the CompactLogix series, including L20/L23/L30/L31/L32/L35, L43, and L45. However, it should be noted that L43 and L45 are only supported when RSLogix 5000 v16.03 software or higher is installed. In addition, this module supports most MicroLogix 1500 LRP controllers. This module is standardized and certified through Ex certification (ATEX directive), CE, CB safety, Lloyd’s Register of Shipping, C/UL Class 1, Zone 2, and other certifications. The environmental conditions for using this module include a relative non condensing humidity of 5% to 95%, an operating temperature range of 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit), and a storage temperature range of -40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit).