产品细节说明：LD800HSE 3BDH000320R02 现场总线链接设备

1. 网关功能：
   • LD800HSE是FF高速以太网(FF-HSE)子网之间的网关，同时也是FF-H1的链接设备。
   • 它支持从监控系统和管理控制台访问连接到基金会现场总线(FF)的现场设备。
2. 冗余支持：
   • 支持设备冗余，确保系统的可靠性和稳定性。
   • 在两个链接设备之间实现独立冗余链接，以确保可靠的故障转移和冗余监控。
3. 通信接口：
   • 提供多种通信接口，包括以太网、串行通信等，以适应不同的通信需求。
   • 具体而言，以太网接口支持10BASE-T/100BASE-TX，传输率可达10 Mbit/s或100 Mbit/s（自动检测）。
   • H1现场总线接口提供4个端口，采用FF H1 3极螺钉端子（可插拔），传输速率为31.25 kbit/s。
4. 数据处理与发布：
   • 具备一定的数据处理能力，包括数据转换、处理和传输。
   • 支持将数据从一个H1链接重新发布到另一个链接，或从H1发布到HSE，反之亦然。
5. 配置与管理：
   • 支持通过系统管理配置连接的H1设备。
   • 允许从主机系统透明配置连接的H1设备，并访问H1设备中的功能块（客户端/服务器）。
6. 电气隔离与物理设计：
   • 可能具备电气隔离功能，以防止电气干扰对系统的影响。
   • 物理设计适应工业环境，可能包括防尘、防水等特性。
7. 认证与标准：
   • 符合CE标准，以及EMC指令2004/108/EG、2006/95/EG和94/9/EG等。
   • 通过FCC、VCCI等电磁兼容性认证。
   • 危险场所认证包括UL Class I, Division 2, Groups A, B, C, D；IECEx Ex nA IIC T4 Gc；ATEX II 3G Ex nA IIC T4 Gc等。

LD800HSE 3BDH000320R02

产品详情参数 ：LD800HSE 3BDH000320R02 现场总线链接设备

• 物理尺寸：长47mm x 高131mm x 宽111mm，安装在DIN导轨上，重量约0.4公斤。
• 环境条件：工作温度0°C至+55°C，非垂直安装和空气对流受阻可能会降低温度上限；贮存温度-20°C至+70°C；相对湿度0%至95%，非冷凝。

LD800HSE 3BDH000320R02  应用领域：

LD800HSE 3BDH000320R02现场总线链接设备广泛应用于各种工业自动化领域，特别是在需要高可靠性和稳定性的场景中，如钢厂、电厂、水泥、化工、造纸、CNC数控机床等行业。LD800HSE 3BDH000320R02现场总线链接设备是一款功能强大、性能稳定的工业自动化设备，能够满足各种复杂工业环境的需求。

Product details: LD800HSE 3BDH000320R02 fieldbus linking device
Gateway function:
LD800HSE is a gateway between FF High Speed Ethernet (FF-HSE) subnets and also a linking device for FF-H1.
It supports access to on-site devices connected to the Foundation fieldbus (FF) from the monitoring system and management console.
Redundancy support:
Support device redundancy to ensure system reliability and stability.
Implement independent redundant links between two linked devices to ensure reliable fault transfer and redundant monitoring.
Communication interface:
Provide multiple communication interfaces, including Ethernet, serial communication, etc., to meet different communication needs.
Specifically, the Ethernet interface supports 10BASE-T/100BASE-TX, with transmission rates of up to 10 Mbit/s or 100 Mbit/s (automatic detection).
The H1 fieldbus interface provides 4 ports, using FF H1 3-pole screw terminals (pluggable), with a transmission rate of 31.25 kbit/s.
Data processing and publishing:
Having certain data processing capabilities, including data conversion, processing, and transmission.
Support republishing data from one H1 link to another, or from H1 to HSE, and vice versa.
Configuration and Management:
Support H1 devices connected through system management configuration.
Allow transparent configuration of H1 devices connected from the host system and access to functional blocks (client/server) within H1 devices.
Electrical isolation and physical design:
May have electrical isolation function to prevent electrical interference from affecting the system.
Physical design is suitable for industrial environments and may include features such as dust and water resistance.
Certification and Standards:
Compliant with CE standards, as well as EMC directives 2004/108/EG, 2006/95/EG, and 94/9/EG, etc.
Obtained electromagnetic compatibility certifications such as FCC and VCCI.
Dangerous place certification includes UL Class I, Division 2, Groups A, B, C, D; IECEx Ex nA IIC T4 Gc; ATEX II 3G Ex nA IIC T4 Gc, etc.
Product details and parameters: LD800HSE 3BDH000320R02 fieldbus linking device
Physical dimensions: length 47mm x height 131mm x width 111mm, installed on a DIN rail, weighing approximately 0.4 kilograms.
Environmental conditions: Operating temperature from 0 ° C to+55 ° C, non vertical installation and obstructed air convection may lower the upper temperature limit; Storage temperature -20 ° C to+70 ° C; Relative humidity ranging from 0% to 95%, non condensing.

LD800HSE 3BDH000320R02 Application areas:

The LD800HSE 3BDH000320R02 fieldbus linking device is widely used in various industrial automation fields, especially in scenarios that require high reliability and stability, such as steel mills, power plants, cement, chemical, papermaking, CNC machine tools and other industries. LD800HSE 3BDH000320R02 fieldbus linking device is a powerful and stable industrial automation equipment that can meet the needs of various complex industrial environments.