产品细节说明：330525-00 Velomitor XA压电速度传感器

330525-00 Velomitor XA压电速度传感器是一款由美国BENTLY（本特利）公司生产的坚固耐用的速度传感器。它属于330500速度传感器系列，是环境防护增强型传感器，旨在满足NEMA 4X和IP65等级无外壳的应用。

• 该传感器的安装螺栓采用管螺纹形式，不要求传感器底座与机壳平齐，降低了安装成本。
• 电缆，BN部件号02173006，最大长度为305米（1,000英尺），不会引起信号衰减。
• 该传感器及其电缆组件可应用于潮湿环境中，在正确安装时可满足IP-65和NEMA 4X的要求。

330525-00 Velomitor XA压电速度传感器是一款高性能、高可靠性的速度传感器，适用于各种工业环境中的振动监测应用。

产品详情参数 ：330525-00 Velomitor XA压电速度传感器

• 灵敏度：4mV/mm/s (100 mV/in/s) ±5% 在100 Hz时
• 频率响应：4.5到2,000 Hz (270 到 120,000 cpm) ±3.0 dB
• 横向灵敏度：小于灵敏度的5%
• 振幅线性度：±2% 到 152 mm/s (6 in/s) 峰值
• 安装共振频率：最小12,000 Hz
• 宽带噪音下限：7.28 micrometres/s (300 microinches/s) rms

330525-00应用领域：

该传感器通常用于测量轴承箱体、壳体或结构的绝对振动，广泛应用于汽轮机、风机、往复式压缩机、电动机、水泵、风扇、鼓风机、离心机、发电机等设备的振动监测。

Product details: 330525-00 Velomitor XA Piezoelectric Speed Sensor

The 330525-00 Velomitor XA piezoelectric speed sensor is a sturdy and durable speed sensor produced by BENTLY (Bentley) in the United States. It belongs to the 330500 speed sensor series and is an environmental protection enhanced sensor designed to meet the requirements of NEMA 4X and IP65 level caseless applications.

The installation bolt of the sensor adopts a pipe thread form, which does not require the sensor base to be flush with the casing, reducing installation costs.
Cable, BN part number 02173006, with a maximum length of 305 meters (1000 feet), will not cause signal attenuation.
This sensor and its cable components can be applied in humid environments and meet the requirements of IP-65 and NEMA 4X when installed correctly.

The 330525-00 Velomitor XA piezoelectric speed sensor is a high-performance and highly reliable speed sensor suitable for vibration monitoring applications in various industrial environments.

Product details and parameters: 330525-00 Velomitor XA piezoelectric speed sensor
Sensitivity: 4mV/mm/s (100 mV/in/s) ± 5% at 100 Hz
Frequency response: 4.5 to 2000 Hz (270 to 120000 cpm) ± 3.0 dB
Lateral sensitivity: less than 5% of sensitivity
Amplitude linearity: ± 2% to 152 mm/s (6 in/s) peak
Installation resonance frequency: minimum 12000 Hz
Broadband noise lower limit: 7.28 micrometres/s (300 microinches/s) rms
330525-00 Application areas:

This sensor is commonly used to measure the absolute vibration of bearing housings, shells, or structures, and is widely used for vibration monitoring of equipment such as steam turbines, fans, reciprocating compressors, electric motors, water pumps, fans, blowers, centrifuges, generators, etc.