产品细节说明：330500-01-04 Bently Nevada Velomitor压电速度传感器

330500-01-04是Bently Nevada（本特利内华达）生产的一款Velomitor压电速度传感器，它用于测量轴承箱体、壳体或结构的振动。这款传感器在压电式加速度计的基础上进行专业化设计，并嵌入了积分电路，使其能够准确地测量振动速度。

1. 高精度：传感器具有高灵敏度，能够精确测量振动速度，为设备的振动监测提供可靠数据。
2. 无移动部件：采用晶体电路，没有移动部件，因此不会产生磨损和退化，提高了传感器的使用寿命和稳定性。
3. 多种安装方式：可以垂直、水平或以任何角度安装，适用于各种复杂的安装环境。
4. 抗冲击能力强：传感器具有强大的抗冲击能力，能够在恶劣的工作环境中保持稳定的性能。

330500-01-04

产品详情参数 ：330500-01-04 Bently Nevada Velomitor压电速度传感器

1. 灵敏度：3.94mV/mm/s（100mV/in/s）±5%在100Hz时。
2. 频率响应：4.5到5kHz（270到300kcpm）±3.0dB；6.0到2.5kHz（360到150kcpm）±0.9dB。
3. 速度范围：1270mm/s（50in/s）峰值。
4. 横向灵敏度：小于灵敏度的5%。
5. 振幅线性度：±2%到152mm/s（6in/s）。
6. 安装共振频率：最小12kHz。
7. 电缆长度：305米（1000英尺）电缆，不会引起信号衰减。
8. 抗冲击能力：24517m/s²（2500g）峰值（有说法为最大5000g峰值）。
9. 壳体材料：不锈钢。
10. 重量：典型值150g（有说法为141g）。
11. 直径：25.3mm。
12. 高度：66mm（有说法为63.2mm）。
13. 使用温度范围：-55℃至+121℃。

应用领域：330500-01-04 Bently Nevada Velomitor压电速度传感器

这款传感器广泛应用于各种大型旋转机械的振动监测，如汽轮机、风机、往复式压缩机、电动机、水泵等。在钢铁、电力、冶金、化工、石化等企业中，它对于确保设备的稳定运行和防止因振动过大而导致的故障具有重要意义。330500-01-04 Bently Nevada Velomitor压电速度传感器是一款高精度、稳定可靠的振动测量设备，广泛应用于各种工业领域。

Product Details: 330500-01-04 Bently Nevada Velomitor Piezoelectric Velocity Sensor

330500-01-04 is a Velomitor piezoelectric velocity sensor produced by Bently Nevada, which is used to measure the vibration of bearing housings, shells, or structures. This sensor is professionally designed based on piezoelectric accelerometers and embedded with an integration circuit, enabling it to accurately measure vibration velocity.

High precision: Sensors have high sensitivity and can accurately measure vibration velocity, providing reliable data for equipment vibration monitoring.
No moving parts: Using crystal circuits, there are no moving parts, so there will be no wear and degradation, which improves the service life and stability of the sensor.
Multiple installation methods: can be installed vertically, horizontally, or at any angle, suitable for various complex installation environments.
Strong impact resistance: Sensors have strong impact resistance and can maintain stable performance in harsh working environments.
Product details and parameters: 330500-01-04 Bently Nevada Velomitor piezoelectric velocity sensor
Sensitivity: 3.94mV/mm/s (100mV/in/s) ± 5% at 100Hz.
Frequency response: 4.5 to 5kHz (270 to 300kcpm) ± 3.0dB; 6.0 to 2.5kHz (360 to 150kcpm) ± 0.9dB.
Speed range: 1270mm/s (50 in/s) peak.
Lateral sensitivity: less than 5% of sensitivity.
Amplitude linearity: ± 2% to 152mm/s (6in/s).
Installation resonance frequency: minimum 12kHz.
Cable length: 305 meters (1000 feet) cable, will not cause signal attenuation.
Impact resistance: 24517m/s ² (2500g) peak (some say the maximum peak is 5000g).
Shell material: stainless steel.
Weight: Typical value is 150g (some say 141g).
Diameter: 25.3mm.
Height: 66mm (some say 63.2mm).
Temperature range for use: -55 ℃ to+121 ℃.
Application area: 330500-01-04 Bently Nevada Velomitor piezoelectric velocity sensor

This sensor is widely used for vibration monitoring of various large rotating machinery, such as steam turbines, fans, reciprocating compressors, electric motors, water pumps, etc. In enterprises such as steel, power, metallurgy, chemical, petrochemical, etc., it is of great significance to ensure the stable operation of equipment and prevent faults caused by excessive vibration. 330500-01-04 Bently Nevada Velomitor piezoelectric velocity sensor is a high-precision, stable and reliable vibration measurement device widely used in various industrial fields.

其他型号推荐：330500-01-04 Bently Nevada Velomitor压电速度传感器